PYLE Audio PLDTF5M Function Characteristic Troubleshooting, Car back video input function

Function Characteristic

Troubleshooting

DVD Player Features

1.Fully Compatible

Fully compatible with most of the discs on the market.

Please refer to the list on page 5 for details.

2.Intelligent Disc Upgrade

Support the intelligent disc upgrade function to keep up with the market competition.

3.Single Chip

Integrate the servo and MPEG2 chips to enhance the stability and achieve the high-performance level.

4.Unique HDCD Function Support Support HDCD function. HDCD, the abbreviation of High Definition Compatible digital, which is a recording/playing technology that improves the CD audio quality. It is able to restore 20Bits audio data truly to enhance the quality and quantity of the digital audio in the highest level. At the same time, it is also compliant with the ordinary audio data of the CDDA format .

6.Support DVD Audio

The unit is fully compatible with the high-quality audio DVD Audio discs, without requiring the support from additional software. It will enable the end-users to enjoy an excellent audio effect.

7.Support DVD-R

The unit is compatible with the DVD-VR discs recorded by theDVD player equipped with the recording function.

8.Car back video input function

This unit includes car back video input function. (When car back camera connects this player), during the operation of car backing, this player changes from play mode to car back video input mode automatically. Then the screen shows you back view, it protects you more safety.

Problem	Action
Operations
	Remove the obstacle between DVD player and
Remote Control	Remote Control.
does not worke	The operating distance of Remote Control is too far
properly.	from the sensor of DVD video player. Operate it
	within the valid distance.
Remote Control	Point the Remote Control at the sensor of the DVD
	video player.
does not worke
	If the batteries in Remote Control are exhausted,
properly.
	please replace them with new ones.
	No disc is inserted. ( No disc symbol appears on
	screen)
	Please insert the disc to play.
Fails to play disc	The disc is placed upside down. Turn it over, place
	it correctly (disc label upward).
	The disc is dirty. Please clean it.
	There may be humidity inside the unit. Please turn
	on the power and for 30 minutes in no disc running
	mode.
	Because the playing mode is in Program/Random
	/ Repeat mode , press these relative function
The player fails to	buttons again to return to playing mode. ( Please
	refer to the Advanced operations part.)
play from the
	While the DVD Title/Chapter or DVD Setup menu
beginning.
	is displaying on monitor, or while playing VCD
	with PBC function, the Instalation menu will be

5.Support Picture CD and Photo CD The unit is compatible with the Picture-CD and Photo CD player, without requiring other support from additional software. It will activate the media player menu to process automatically. (In other words,playing automatically.)

-4-

	displayed on monitor.
	Some discs have memorized the pause command
Stop playing	automatically in the original	record. So the unit
	will stop playing automatically at this memorized
automatically
	command part.
Dying	It is a normal phenomenon	that the unit dying
	occasionally during operation. Press RESET button
	to restart the unit.
	-25-