Manuals / Kenmore / Kitchen Appliance / Refrigerator

Kenmore 795.7809, 795.7900, 795.6900, 795.6827, 795.7827, 795.76200 manual Door Racks, Door Bins

Models: 795.76200 795.7809 795.7827 795.6827 795.6900 795.7900

1 41

Download 41 pages 63.7 Kb

Page 28

Image 28

DOOR RACKS

The door racks may be removed for easier cleaning. Snap-on Door Racks

To remove the racks:

1.Remove all items in the door racks.

2.Push the rack against the inside wall of the door (A) and lift up on door rack (B).

4.If moving bins to lowest position, be especially sure to secure them in place so that they don'tfall out of the door.

[] WARNING: Somebody can be hurt if door bins are not firmly assembled.

NOTE: Do not adjust a bin that is loaded with food.

To replace the racks:

1.Hold either end of the door rack against the inside wall of the door.

2.Push down on rack until it locks in place.

DOOR BINS

1. Bins can be moved to either side of the door.

2. To remove the bin, simply lift the bin and pull straight out.

3.To replace the bin, slide it in above the desired

support and push down until it locks completely so that a "click" sound is heard

Page 28

Image 28

Kenmore 795.7809, 795.7900, 795.6900, 795.6827, 795.7827, 795.76200 manual Door Racks, Door Bins

Contents

= color number English Version Spanish French One Year Limited Warranty Disclaimer of implied warranties limitation of remedies Master Protection Agreements Page Before YOU Throw Away Your OLD Refrigerator Or Freezer Recommended Grounding MethodUSE of Extension Cords Electrical Shock Hazard Freezer Drawer Model ODurabase Freezer Swing Door Model Installation To Install Base GrilleUnpacking Your Refrigerator Base Grille Instructions HOW to Remove Pull OUT Drawer HOW to Remove Refrigerator DoorFor Freezer Drawer Models Ta es Top Replacing Refrigerator Door HOW to Install Pull OUT Drawer Ipprts Lower door into final position and tighten the screws Refrigerator Doors For Freezer Drawer Models REMOVING,REVERSING and ReplacingFlat-head screwdriver for prying Pin HOW to Reverse Door Handle HOW to Replace Refrigerator Freezer Doors For Freezer Swing Models 10mm or 13/32-inch socket wrench Refrigerator Doors For Freezer Swing ModelsNo Phillips head screwdriver 4inch socket wrench Pin Insert Bracket After After Completing the JOB Leveling and Door ClosingDoor Alignment Instructions below to align the doors Ensuring Proper AIR Circulation Identify your control type Adjusting Control Settings Refrigerator Food Storage Guide Storing Frozen Food Refrigerator Shelves Sliding Out Shelves optional on some modelsTo remove a sliding shelf from its metal frame Convenience Shelves optional on some models Refrigerator Features PantryOn some models Crisper Humidity Control on some models Crisper Cover with Lattice on Inner Surface on some modelsTo remove the glass To remove the crisper cover Door Racks Door Bins Dairy BIN EGG BOX on some modelsDurabase on some models Durabase Divider on some models Wire Durabase on some models How to useGLIDE-OUT Drawer Basket on some models Tilting Door on some models General Cleaning Tips Light Bulb ReplacementOutside Door Liners and Gaskets To change the freezer light Power InterruptionsIf you choose to leave the refrigerator on while you When YOU should SET the Icemaker Power Switch to O OFF IcemakerNormal Sounds YOU MAY Hear Preparing for Vacation Power drill Before YOU Begin Installation Instructions Choose the Valve Location Drill the Hole for the ValveFasten the Shut OFF Valve Tighten the Pipe Clamp Connect the Tubing to the Refrigerator Turn the Water on AT the Shut OFF ValvePlug in the Refrigerator Start the Icemaker Refrigerator does not Operate Vibration or Rattling NoiseCheck if Then Compressor Motor Seems to RUN TOO Much Doors will not Close CompletelyFrost or ICE Crystals on Frozen Food Check if Then Cubes Produced by Icemaker are TOO Small Refrigerator Seems to Make TOO Much NoiseDoors are Difficult to Open Automatic Icemaker does not Work Lights do not Work Iiiiiiiiiiiiiiiiiiiiiiii