Lantronix SLC 8000 manual Escape Sequence

8: Device Ports

Escape Sequence

The escape character used to get the attention of the SSH or Telnet client. It is optional, and if not specified, Telnet and SSH use their default escape character.

For Telnet, the escape character is either a single character or a two-character sequence consisting of '^' followed by one character. If the second character is '?', the DEL character is selected. Otherwise, the second character is converted to a control character and used as the escape character.

For SSH, the escape character is a single character.

4.Click the right arrow. The host displays in the Hosts box.

5.Repeat steps 2-4 to add more hosts to the host list.

Note: To clear fields before adding the next host, click the Clear Host Parameters button.

6.You have the following options:

-To remove a host from the host list, select the host in the Hosts box and click the left arrow.

-To give the host a higher precedence, select the host in the Hosts box and click the up arrow.

-To give the host a lower precedence, select the host in the Hosts box and click the down arrow.

7.Click the Add Host List button. After the process completes, a link back to the Device Ports > Settings page displays.

SLC™ 8000 Advanced Console Manager User Guide 132