Lantronix SLC 8000 manual TACACS+ Commands, Set tacacs+ one or more parameters

	11: User Authentication
User Menus	Right to create a custom user menu for the CLI for LDAP users.
Web Access	Right to access Web-Manager.
Diagnostics &	Right to obtain diagnostic information and reports about the unit.
Reports
Firmware &	Right to upgrade the firmware on the unit and save or restore a configuration (all
Configuration	settings). Selecting this option automatically selects Reboot & Shutdown.
Internal Modem	Right to update internal modem settings.
Device Port	Right to control device ports.
Operations
Device Port	Right to enter device port settings.
Configuration
USB	Right to enter modem settings for USB devices and control USB storage devices.
SD Card	Right to enter settings for SD card.

5. Click the Apply button.

Note: You must reboot the unit before your changes will take effect.

TACACS+ Commands

These commands for the command line interface correspond to the web page entries described above.

To configure the SLC unit to use TACACS+ to authenticate users who log in via the Web, SSH, Telnet, or the console port:

set tacacs+ <one or more parameters>

Parameters

breakseq <1-10 Chars> clearports <Port List> dataports <Port List> encrypt <enabledisable> escapeseq <1-10 Chars> listenports <Port List> secret <TACACS+ Secret> server1 <IP Address or Name> server2 <IP Address or Name> server3 <IP Address or Name> state <enabledisable>

To set user group and permissions for TACACS+ users:

set tacacs+ group <defaultpoweradmin>

To set permissions for TACACS+ users not already defined by the user rights group:

set tacacs+ permissions <Permission List>

where

<Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, do, ub, rs, rc, dr, wb, sn, ad, md, sd

SLC™ 8000 Advanced Console Manager User Guide 208