4: Quick Setup

The following table lists the SLC navigation actions, buttons, and options.

 

Table 4-3 LCD Arrow Keypad Actions

 

 

Button

Action

Right arrow

To move to the next option (e.g., from Network Settings to Console Settings)

 

 

Left arrow

To return to the previous option

 

 

Enter (center button)

To enter edit mode

 

 

Up and down arrows

Within edit mode, to increase or decrease a numerical entry

 

 

Right or left arrows

Within edit mode, to move the cursor right or left

 

 

Enter

To exit edit mode

 

 

Up and down arrows

To scroll up or down the list of parameters within an option (e.g., from IP

 

Address to Mask)

 

 

Table 4-4 Front Panel Setup Options with Associated Parameters

Left/Right Arrow

 

Current

Eth1

Console

Date /

Release

Internal

User

Location

Device

 

Time

Network

Port

Time

 

Temp

Strings

 

Ports

 

 

Settings

Settings

Settings

 

 

 

 

 

 

User ID &

Eth1 IP

Baud Rate,

Time Zone

Firmware

Reading in

Displays

Indicates

Detects the

 

Current

Address

Data Bits,

 

version and

Celsius &

configured

the Rack

connection

 

TIme

 

Stop Bits,

 

date code

Fahrenheit

user

(RK), Row

state of each

 

 

 

Parity,

 

(display

 

string(s), if

(RW) &

port:

 

 

 

Flow

 

only)

 

any.

Cluster

0=No DSR

 

 

 

Control

 

 

 

 

(CW)

input signal

 

 

 

 

 

 

 

 

locations.

detected on

Up/

 

 

 

 

 

 

 

 

device port

Down

 

 

 

 

 

 

 

 

1=DSR input

Arrow

 

 

 

 

 

 

 

 

signal

 

 

 

 

 

 

 

 

 

detected on

 

 

 

 

 

 

 

 

 

device port

 

 

 

 

 

 

 

 

 

 

 

 

Eth1

Data Bits

Date/Time

Restore

 

 

 

 

 

 

Subnet

 

 

Factory

 

 

 

 

 

 

Mask

 

 

Defaults

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gateway

Stop Bits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS1

Parity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS2

Flow

 

 

 

 

 

 

 

 

 

Control

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DNS3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: The individual screens listed from left to right in Table 4-4can be enabled or disabled for display on the SLC LCD screen. The order of appearance of the screens, if enabled, along with the elected “Home Page” may vary on the LCD monitor according to configuration. The internal temperature, user strings, location and device ports LCD menus are disabled by default. See LCD/Keypad (on page 251) for instructions on enabling and disabling screens.

SLC™ 8000 Advanced Console Manager User Guide

41

Page 41
Image 41
Lantronix SLC 8000 manual Right arrow, Left arrow, Enter center button, Up and down arrows, Right or left arrows