Lantronix SLC 8000 manual Diagnostics, ARP Table, Netstat, Host Lookup

12: Maintenance

Diagnostics

The Maintenance > Diagnostics page provides methods for diagnosing problems such as network connectivity and device port input/output problems. You can use equivalent commands on the command line interface.

1.Click the Maintenance tab and select the Diagnostics option. The following page displays:

Figure 12-7 Maintenance > Diagnostics

2.Select Diagnostics from checklist (one or more diagnostic methods you want to run, or select All to run them all):

ARP Table	Address Resolution Protocol (ARP) table used to view the IP address-to-hardware
	address mapping.
Netstat	Displays network connections. If you select the checkbox, select the TCP or UDP protocol,
	or select All for both protocols to control the output of the Netstat report.
Host Lookup	Select to verify that the SLC 8000 advanced console manager can resolve the host
	name into an IP address (if DNS is enabled). If selected, also enter a host name in the
	corresponding Hostname field,

SLC™ 8000 Advanced Console Manager User Guide 240