Lantronix SLC 8000 Login/CHAP Host, Chap Secret, Static Route IP, Address, Static Route Subnet

	8: Device Ports
Login/CHAP Host	The login name (for PAP authentication) or CHAP host (for CHAP authentication)
	associated with this site. If a modem has sites enabled and the authentication is
	successful at dial-in (for modem states dial-in, dial-back, CBCP server, dial-in &
	dial-on-demand, or dial-back & dial-on-demand), and the name that was
	authenticated matches the Login/CHAP Host, the site parameters will be used for
	the remainder of the modem connection.
CHAP Secret	The CHAP secret associated with this site. If a modem has sites enabled and
	CHAP authentication enabled, then at dial-in, if the remote server sends a name
	in the CHAP challenge response that matches the CHAP host of a site, the CHAP
	secret for the site will be used to authenticate the CHAP challenge response sent
	by the remote server.
Authentication	The type of authentication, PAP or CHAP, for which this site is applicable. On
	dial-in authentication, only sites with the authentication type that matches the
	authentication type configured for the modem will be used to try to find a matching
	site.
Timeout Logins	For text dial-in connections, the connection can time out after the connection is
	inactive for a specified number of minutes.
Negotiate IP Address	If the SLC advanced console managerand the remote server should negotiate the
	IP addresses for each side of the PPP connection, select Yes. Select No if the
	address of the SLC unit (Local IP) and remote server (Remote IP) need to be
	specified.
Static Route IP	The Static Route IP Address, Subnet Mask and Gateway must be configured for
Address	dial-on-demand sites. The SLC 8000 advanced console manager will
	automatically dial-out and establish a PPP connection when IP traffic destined for
	the network specified by the static route needs to be sent.
	Note: Static Routing must be enabled on the Network - Routing page for dial-on-
	demand connections.
Static Route Subnet	The subnet mask for a dial-on-demand connection.
Mask
Static Route Gateway	The gateway for a dial-on-demand connection.
Dial-out Number	The dial-out number must be specified for dial-on-demand sites. This indicates
	the phone number to dial when the SLC unit needs to send IP traffice for a dial-
	on-demand connection.
Dial-out Login	User ID for authentication when dialing out to a remote system, or when a remote
	system requests authentication from the SLC 8000 unit when it dials in. May have
	up to 32 characters. This ID is used for authenticating the SLC 8000 advanced
	console manager during the dial-out portion of a dial-back (including CBCP
	server) and dial-on-demand.
Dial-out Password	Password for authentication when dialing out to a remote system, or if a remote
	system requests authentication from the SLC unit when it dials in. May have up to
	64 characters
Retype Password	Re-enter password for dialing out to a remote system. May have up to 64
	characters.
Dial-back Number	The phone number to dial on callback for text or PPP dial-back connections. A
	site must successfully authenticate, have Allow Dial-backenabled and have a
	Dial-back Number defined in order for the site to be used for callback.
Allow Dial-back	If enabled, the site is allowed to be used for dial-back connections.
Dial-back Delay	For dial-back and CBCP Server, the number of seconds between the dial-in and
	dial-out portions of the dialing sequence.
Dial-back Retries	For dial-back and CBCP Server, the number of times the SLC unit will retry the
	dial-out portion of the dialing sequence if the first attempt to dial-out fails.

SLC™ 8000 Advanced Console Manager User Guide 150