Lantronix SLC 8000 manual Device Port Sensorsoft Device, Devices Device Ports Sensorsoft

		8: Device Ports
Status/Info
	Outlet Status	Note: If there is a master unit and an expansion unit, the master unit is Tower
		A and the expansion unit is Tower B.
		For Tower A or Tower B, select All Outlets or Single Outlet to view the status
		of all outlets or a single outlet of the SLP device. If you select Single Outlet,
		enter a value of 1-8 for the SLP8 or 1-16 for the SLP16 device. For the
		ServerTech CDU, the valid range of outlets is specified by the Number of
		Outlets setting (for Tower A) or the Number of Expansion Outlets setting (for
		Tower B).
		Click the Outlet Status link to see the status of the selected outlet(s).
	Environmental Status	Click the link to view the environmental status (e.g., temperature and humidity.)
	Infeed Status	Click the link to view the status of the data the SLP power manager or
		ServerTech CDU is receiving.
	System Info	Click the link to see system information pertaining to the SLP or ServerTech
		CDU device.
Commands
	Restart	To restart the SLP power manager or ServerTech CDU device, select the
		checkbox.
	Control Outlet	For Tower A or Tower B, select All Outlets or Single Outlet, the number of
		the outlet to be controlled (1-8 for the SLP8 or 1-16 for the SLP16) and select
		the command for the outlet (No Action, On, Off, Cycle Power). No Action is
		the default.

2. Click the Apply button.

Device Port - Sensorsoft Device

Devices made by Sensorsoft are used to monitor environmental conditions.

1.In the Connected to drop-down menu above the IP Settings section of the Device Ports > Settings page, select Sensorsoft.

2.Click the Device Commands link. The following page displays:

Figure 8-8 Devices > Device Ports > Sensorsoft

SLC™ 8000 Advanced Console Manager User Guide 114