Lantronix SLC 8000 manual Radius Commands, To set user group and permissions for Radius users

11: User Authentication

SD Card

Right to enter settings for SD card.

5. Click the Apply button.

Note: You must reboot the unit before your changes will take effect.

RADIUS Commands

These commands for the command line interface correspond to the web page entries described above.

To configure the SLC unit to use RADIUS to authenticate users who log in via the Web, SSH, Telnet, or the console port:

set radius <one or more parameters>

Parameters

breakseq <1-10 Chars> clearports <Port List> dataports <Port List> escapeseq <1-10 Chars> listenports <Port List> state <enabledisable>

To identify the RADIUS server(s), the text secret, and the number of the TCP port on the RADIUS server:

set radius server <12> host <IP Address or Hostname> secret <Secret> [port <TCP Port>]

The default port is 1812.

To set the number of seconds after which the connection attempt times out:

set radius timeout <disable1-30>

May be 1-30 seconds.

To set user group and permissions for RADIUS users:

set radius group <defaultpoweradmin>

To set permissions for RADIUS users not already defined by the user rights group:

set radius permissions <Permission List>

where

<Permission List> is one or more of nt, sv, dt, lu, ra, sk, um, dp, do, ub, rs, rc, dr, wb, sn, ad, md, sd

To remove a permission, type a minus sign before the two-letter abbreviation for a user right.

To set a default custom menu for RADIUS users:

set radius custommenu <Menu Name>

SLC™ 8000 Advanced Console Manager User Guide 199