Lantronix SLC 8000 manual Deviceport, tcp, or udp, Enable for, Dial-back

	11: User Authentication
Data Ports	The ports users are able to monitor and interact with using the connect direct
	command. U1 and U2 denote the USB upper and lower ports on the front of
	the SLC unit.
Clear Port Buffers	The ports whose port buffer users may clear using the set locallog
	clear command.
Enable for	Select to grant a user. Users with dial-back access can dial into the SLC unit
Dial-back	and enter their login and password. Once the SLC 8000 advanced console
	manager authenticates them, the modem hangs up and dials them back.
	Disabled by default.
Dial-back Number	The phone number the modem dials back on depends on this setting for the
	device port. The user is either on a fixed number, or on a number that is
	associated with the user’s login (specified here).
Escape Sequence	A single character or a two-character sequence that causes the SLC 8000
	advanced console manager to leave direct (interactive) mode. (To leave
	listen mode, press any key.)
	A suggested value is Esc+A (escape key, then uppercase "A" performed
	quickly but not simultaneously). You would specify this value as \x1bA, which
	is hexadecimal (\x) character 27 (1B) followed by an A.
	This setting allows the user to terminate the connect direct command
	on the command line interface when the endpoint of the command is
	deviceport, tcp, or udp.
Break Sequence	A series of one to ten characters users can enter on the command line
	interface to send a break signal to the external device. A suggested value is
	Esc+B (escape key, then uppercase “B” performed quickly but not
	simultaneously). You would specify this value as \x1bB, which is
	hexadecimal (\x) character 27 (1B) followed by a B.
Custom Menu	If custom menus have been created you can assign a default custom menu
	to the group. See Custom Menus for more information.
Display Menu at Login	Check the checkbox to display the menu at login.

3. Select or clear the checkboxes for the following rights:

Full Administrative	Right to add, update, and delete all editable fields.
Networking	Right to enter Network settings.
Services	Right to enable and disable system logging, SSH and Telnet logins, SNMP, and
	SMTP.
Secure Lantronix	Right to view and manage Secure Lantronix units (e.g., SLP, Spider, or SLC units)
Network	on the local subnet.
Date/Time	Right to set the date and time.
Reboot & Shutdown	Right to shut down and reboot the SLC unit.
Local Users	Right to add or delete local users on the system.
Remote	Right to assign a remote user to a user group and assign a set of rights to the user.
Authentication
SSH Keys	Right to set SSH keys for authenticating users.
User Menus	Right to create a custom user menu for the CLI for LDAP users.
Web Access	Right to access Web-Manager.
Diagnostics &	Right to obtain diagnostic information and reports about the unit.
Reports

SLC™ 8000 Advanced Console Manager User Guide 211