Lantronix SLC 8000 manual Network Settings, Date & Time Settings

4: Quick Setup

Note: Once you click the Apply button on the Quick Setup page, you can continue using the web interface to configure the SLC further.

5. Enter the following settings:

Network Settings

Note: Configurations with the same IP subnet on multiple interfaces (Ethernet or PPP) are not currently supported.

Network Setting	Description
Eth 1 Settings	 Obtain from DHCP: Acquires IP address, subnet mask, hostname and gateway
	from the DHCP server. (The DHCP server may not provide the hostname
	gateway, depending on its setup.) This is the default setting. If you select this
	option, skip to Gateway.
	 Obtain from BOOTP: Lets a network node request configuration information from
	a BOOTP "server" node. If you select this option, skip to Gateway.
	 Specify: Lets you manually assign a static IP address, generally provided by the
	system administrator.
IP Address	 Enter an IP address that is unique and valid on your network. There is no default.
(if specifying)	 Enter all IP addresses in dot-quad notation. Do not use leading zeros in the fields
	for dot-quad numbers less than 100. For example, if your IP address is
	172.19.201.28, do not enter 028 for the last segment.
	Note: Currently, the SLC 8000 advanced console manager does not support
	configurations with the same IP subnet on multiple interfaces (Ethernet or PPP).
Subnet Mask	If specifying an IP address, enter the subnet mask for the network on which the SLC
	unit resides. There is no default.
Default Gateway	The IP address of the router for this network. There is no default.
Hostname	The default host name is slcXXXX, where XXXX is the last 4 characters of the
	hardware address of Ethernet Port 1. There is a 64-character limit (contiguous
	characters, no spaces). The host name becomes the prompt in the command line
	interface.
Domain	If desired, specify a domain name (for example, support.lantronix.com). The domain
	name is used for host name resolution within the SLC 8000 advanced console
	manager. For example, if abcd is specified for the SMTP server, and
	mydomain.com is specified for the domain, if abcd cannot be resolved, the SLC unit
	attempts to resolve abcd.mydomain.com for the SMTP server.

Date & Time Settings

Date & Time Setting	Description
Change Date/Time	Select the checkbox to manually enter the date and time at the SLC unit’s location.
Date	From the drop-down lists, select the current month, day, and year.
Time	From the drop-down lists, select the current hour and minute.
Time Zone	From the drop-down list, select the appropriate time zone.

SLC™ 8000 Advanced Console Manager User Guide 45