Lantronix SLC 8000 manual Technical Specifications

		3: Installation
Technical Specifications
		Table 3-2 SLC Technical Specifications
	Component	Description
	Serial Interface (Device)	 (48) RJ45-type 8-conductor connectors which are individually configurable
		standard or reversed pinouts
		 Speed software selectable (300 to 230400 baud)
		Note: Device ports for the SLC 8000 advanced console manager are
		reversed by default. Do not use rolled cables and adapters when replacing an
		SLC 8000 advanced console manager with the SLC 8000 model.
	Serial Interface (Console)	 (1) RJ45-type 8-pin connector (DTE)
		 Speed software selectable (300 to 230400 baud)
		 LEDs:
		 Green light ON indicates data transmission activities
		 Yellow light ON indicates data receiving activities
	Network Interface	 (2) 10/100/1000 Base-T RJ45 Ethernet
		 LEDs:
		 Green light ON indicates a link at 1000 Base-T
		 Green light OFF indicates a link at other speeds or no link
		 Yellow light ON indicates a link is established
		 Yellow light blinking indicates activity
	Power Supply AC	 Universal AC power input: 100-240 VAC
	(single or dual)	 50 or 60 Hz IEC 60320/C19IEC-type regional cord set included
	Power Supply DC (dual)	20V to 72V input
	Power Consumption	Less than 25 watts
	Dimensions	1U, 1.75 in x 17.25 in x 12 in
	Weight	11.5 lbs or less, depending on options
	Temperature	 Operating: 0 to 50°C (32 to 122°F), 30 to 90% RH, non-condensing
		 Storage: -20 to 80°C (-4 to 176°F), 10 to 90% RH, non-condensing
	Relative Humidity	 Operating: 10% to 90% non-condensing; 40% to 60% recommended
		 Storage: 10% to 90% non-condensing
	USB Ports	 (2) ports, type A, host USB 2.0 (HS, FS, LS)
	Memory Card	Single memory card slot supporting:
		 SD
		 SDHC
	Modem	 300 bps to 56K bps data rate
		 Upstream 48K bps, downstream 56K bps
		 V.44 data compression (V92MB-U, V92HU)
		 V.42 bis and MNP-5 data compression
		 V.29 FastPOS support
		 Caller ID type I and II for select countries
		 Agency approvals: Transferable FCC68, CS03 and CTR21 certifications,
		IEC60601-1 (Medical Electronics) compliant, CE Marking, IEC60950 approved

SLC™ 8000 Advanced Console Manager User Guide 28