Lantronix SLC 8000 manual Host Parameters, To retry connecting to the host list

8: Device Ports

Figure 8-12 Devices > Host Lists

2. Enter the following:

Note: To clear fields in the lower part of the page, click the Clear Host List button.

Host List Id	Displays after a host list is saved.
Host List Name	Enter a name for the host list.
Retry Count	Enter the number of times the SLC advanced console manager should attempt
	to retry connecting to the host list.
Authentication	Select to require authentication when the SLC unit connects to a host.

3.You have the following options:

-To save the host list without adding hosts at this time, click the Add Host List button.

-To add hosts, enter the following:

Host Parameters

Host	Name or IP address of the host.
Protocol	Protocol for connecting to the host (TCP, SSH, or Telnet).
Port	Port on the host to connect to.

SLC™ 8000 Advanced Console Manager User Guide 131