Lantronix SLC 8000 manual Local User Rights Commands

11: User Authentication

custommenu <Menu Name> dataports <Port List> dialbacknumber <Phone Number> displaymenu <enabledisable> escapeseq <1-10 Chars>

group <defaultpoweradminCustom Group Name> listenports <Port List>

passwordexpires <enabledisable> permissions <Permission List> uid <User Identifier>

To set whether a complex login password is required:

set localusers complexpasswords <enabledisable>

To enable or disable authentication of local users:

set localusers state <enabledisable>

To set a login password for the local user:

set localusers password <User Login>

To delete a local user:

set localusers delete <User Login>

To view settings for all users or a local user:

show localusers [user <User Login>]

To block (lock out) a user's ability to log in:

set localusers lock <User Login>

Note: This capability is not available on the web page.

To allow (unlock) a user's ability to log in:

set localusers unlock <User Login>

Note: This capability is not available on the web page.

Local User Rights Commands

The following CLI commands correspond to the web page entries described above.

To add a local user to a user group or to change the group the user belongs to:

set localusers addedit <user> group <defaultpoweradmin>

To set a local user's permissions (not defined by the user group):

set localusers addedit <user> permissions <Permission List>

SLC™ 8000 Advanced Console Manager User Guide 184