Lantronix SLC 8000 manual IP Filter Commands, Updating an IP Filter, Deleting an IP Filter

6: Basic Parameters

Updating an IP Filter

To update an IP filter rule set:

1.From the Network > IP Filter page, the administrator selects the IP filter ruleset to be edited and clicks the Edit Ruleset button to return to the Network > IP Filter Ruleset (Adding/Editing Rulesets) page (see Figure 6-3).

2.Edit the information as desired and click the Apply button.

Deleting an IP Filter

To delete an IP filter rule set:

1.On the Network > IP Filter page, the administrator selects the IP filter ruleset to be deleted and clicks the Delete Ruleset button.

IP Filter Commands

The following CLI commands correspond to the web page entries described above.

To enable or disable IP filtering for incoming network traffic:

set ipfilter state

To set IP filter mapping:

set ipfilter mapping <parameters>

Parameters

ethernet <12> state <disable>

ethernet <12> state <enable> ruleset <Ruleset Name> deviceport <1..48> state <disable>

deviceport <1..48> state <enable> ruleset <Ruleset Name> internal modem state <disable>

internal modem state <enable> ruleset <Ruleset Name> usbport <U1U2> state <disable>

usbport <U1U2> state <enable> ruleset <Ruleset Name>

To set IP filter rules:

set ipfilter rules <parameters>

Parameters

add <Ruleset Name> delete <Ruleset Name>

edit <Ruleset Name> <Edit Parameters>

Edit Parameters:

append

insert <Rule Number>

SLC™ 8000 Advanced Console Manager User Guide 67