Lantronix SLC 8000 manual Basic Parameters, Requirements

6:Basic Parameters

This chapter explains how to set the following basic configuration settings for the SLC advanced console manager using the SLC web interface or the CLI:

Network parameters that determine how the SLC 8000 advanced console manager interacts with the attached network

Firewall and routing

Date and time

Note: If you entered some of these settings using a Quick Setup procedure, you may update them here.

Requirements

If you assign a different IP address from the current one, it must be within a valid range, unique to your network, and with the same subnet mask as your workstation.

To configure the unit, you need the following information:

Eth1	IP address:	________ - ________ - ________ - ________
	Subnet mask:	________ - ________ - ________ - ________
Eth2	IP address (optional):	________ - ________ - ________ - ________

Subnet mask (optional): ________ - ________ - ________ - ________

Gateway: ___________ - ___________ - ___________ - ___________

DNS: ___________ - ___________ - ___________ - ___________

SLC™ 8000 Advanced Console Manager User Guide 57