Lantronix SLC 8000 manual Adding, Editing or Deleting a User, To add a user

11: User Authentication

2)Continue to set Local User Passwords:

Complex Passwords	Select to enable the SLC unit to enforce rules concerning the password structure
	(e.g., alphanumeric requirements, number of characters, punctuation marks).
	Disabled by default.
	Complexity rules:
	Passwords must be at least eight characters long.
	They must contain one upper case letter (A-Z), one lower case letter (a-z), one
	digit ( 0-9), and one punctuation character (()`~!@#$%%^&*-+=\{}[]:;"'<>,.?/_).
Allow Reuse	Select to enable users to continue to reuse old passwords. If you disable the
	check box, they cannot use any of the Reuse History number of passwords.
	Enabled by default.
Reuse History	The number of passwords the user must use before reusing an old password. The
	default is 4.
	For example, if you set reuse history to 4, the user may reuse an old password
	after using 4 other passwords.
Password Lifetime	The number of days until the password expires. The default setting is 90.
(days)
Warning Period	The number of days ahead that the system warns that the user's password will
(days)	expire. The default setting is 7.
Max Login Attempts	The number of times (up to 8) the user can attempt to log in unsuccessfully before
	the system locks the user out. The default setting is 0 (disabled).
Lockout Period	The number of minutes (up to 90) the locked-out user must wait before trying to
(minutes)	log in to the web interface again. The default setting is 0 (disabled).

2. Click the Apply button.

Adding, Editing or Deleting a User

Through this User Authentication > Local/Remote Users page, you can delete a user listed in the table or open a page for adding or editing a user.

To add a user:

1.On the User Authentication > Local/Remote Users, click the Add/Edit User button. The User Authentication > Local/Remote User > Add/Edit User page displays.

SLC™ 8000 Advanced Console Manager User Guide 179