Lantronix SLC 8000 manual Dial-in Text Mode to a Remote Device

13: Application Examples

6. Use the escape sequence to escape from direct mode back to the command line interface.

Dial-in (Text Mode) to a Remote Device

This example shows a modem connected to an SLC device port, and a Sun server connected to another SLC device port. You can configure the modem for text mode dial-in, so a remote user can dial into the modem using a terminal emulation program and access the Sun server. (HyperTerminal™, which comes with the Microsoft® Windows™ operating system, is an example of a terminal emulation program.)

Figure 13-3 Dial-in (Text Mode) to a Remote Device

Sun UNIX Server

Remote User

Modem

Serial Cable to Port 2

Phone System

		SLC 8000 Advanced Console Manager
Phone	Serial Cable
Line	to Port 1

In this example, the sysadmin would:

1. Configure the device port that the modem is connected to for dial-in:

[SLC]> set deviceport port 1 modemmode text Device Port settings successfully updated.

[SLC]> set deviceport port 1 initscript "AT&F&K3&C1&D2%C0A" Device Port settings successfully updated.

[SLC]> set deviceport port 1 auth pap Device Port settings successfully updated.

[SLC]> set deviceport port 1 localsecret "password" Device Port settings successfully updated.

[SLC]> set deviceport port 1 modemstate dialin Device Port settings successfully updated. [SLC]>

2. Configure the device port that is connected to the console port of the Sun UNIX server:

[SLC]> set deviceport port 2 baud 57600 flowcontrol none Device Port settings successfully updated.

3.Dial into the SLC 8000 advanced console manager via the modem using a terminal emulation program on a remote PC. A command line prompt displays.

4.Log into the SLC unit.

CONNECT 57600 Welcome to the SLC login: sysadmin Password:

Welcome to the SLC Console Manager Model Number: SLC 8048

For a list of commands, type 'help'. [SLC]>

SLC™ 8000 Advanced Console Manager User Guide 257