Lantronix SLC 8000 manual Emailing Logs and Reports, Status Commands

12: Maintenance

Status Commands

These commands for the command line interface correspond to the web page entries described above.

To display device port modes and states for one or more ports:

show portstatus [deviceport <Device Port List or Name>] [email <Email Address>]

You can optionally email the displayed information.

To display a snapshot of configurable parameters:

show sysconfig [display <basicauthdevices>] [email <Email Address]

You can optionally email the displayed information.

Displays a report of all configurable parameters or a shorter report with basic system settings, authentication settings, or device settings.

To generate a report for one or more ports:You can optionally email the displayed information.

show portcounters [deviceport <Device Port List or Name>] [email <Email Address>]

To display the overall status of all SLC units:

show sysstatus [email <Email Address>]

You can optionally email the displayed information.

To display a list of all current connections:

show connections [email <Email Address>]

You can optionally email the displayed information.

To provide details, e.g., endpoint parameters and trigger, for a specific connection:

show connections connid <Connection ID> [email <Email Address>]

You can optionally email the displayed information.

Note: Use the basic show connections command to obtain the Connection ID.

Emailing Logs and Reports

The following logs and reports can be directly emailed to a specific individual or to Lantronix Technical Support directly from the log page:

System Log (Figure 12-4)

Audit Log (Figure 12-5)

SLC™ 8000 Advanced Console Manager User Guide 246