Lantronix SLC 8000 manual Date/Time, Sysadmin, Password

	4: Quick Setup
CLI Quick Setup	Description
Settings
Date/Time	If the date and time displayed are correct, type n and continue. If the date and time
	are incorrect, type y and enter the correct date and time in the formats shown at the
	prompts.
Sysadmin	Enter a new sysadmin password.
password

After you complete the Quick Setup script, the changes take effect immediately.

Figure 4-9 Quick Setup Completed in CLI

Quick Setup will now step you through configuring a few basic settings.

The current settings are shown in brackets ('[]').

You can accept the current setting for each question by pressing <return>.

____Ethernet Port and Default Gateway___________________________________

The SLC8048 has two ethernet ports, Eth1 and Eth2. By default, both ports are configured for DHCP. Configure Eth1: (1) obtain IP Address from DHCP

(2)obtain IP Address from BOOTP

(3)static IP Address

Enter 1-3: [1]

The SLC8048 can be configured to use a default gateway.

Enter gateway IP Address: [none]

____Hostname____________________________________________________________

The current hostname is 'slc', and the current domain is '<undefined>'. The hostname will be shown in the CLI prompt.

Specify a hostname: [slc]

Specify a domain: [<undefined>]

____Time Zone___________________________________________________________

The current time zone is 'GMT'. Enter time zone: [GMT]

____Date/Time___________________________________________________________

The current time is Tue Feb 4 11:26:55 2014 Change the current time? [n]

____Sysadmin Password___________________________________________________

Enter new password: [<current password>] Quick Setup is now complete.

[slc]>

SLC™ 8000 Advanced Console Manager User Guide 48