Lantronix SLC 8000 V3 Read-Only User, V3 Read-Write User, SNMP, SSH, Telnet, and Logging Commands

	7: Services
V3 Read-Only User
User Name	SNMP v3 is secure and requires user-based authorization to access SLC MIB objects.
	Enter a user ID. The default is snmpuser. Up to 20 characters.
Password/Retype	Password for a user with read-only authority to use to access SNMP v3. The default is
Password	SNMPPASS. Up to 20 characters.
Passphrase/	Passphrase associated with the password for a user with read-only authority. Up to 20
Retype	characters.
Passphrase
V3 Read-Write User
User Name	SNMP v3 is secure and requires user-based authorization to access SLC MIB objects.
	Enter a user ID for users with read-write authority. The default is snmprwuser. Up to
	20 characters.
Password/	Password for the user with read-write authority to use to access SNMP v3. The default
Retype Password	is SNMPRWPASS. Up to 20 characters.
Passphrase/	Passphrase associated with the password for a user with read-write authority. Up to 20
Retype	characters.
Passphrase

3. To save, click the Apply button.

SNMP, SSH, Telnet, and Logging Commands

The following CLI commands correspond to the web page entries described above.

To configure services (system logging, SSH and Telnet access, SSH and Telnet timeout, SNMP agent, email (SMTP) server, and audit log):

set services <one or more services parameters>

Parameters

alarmdelay <1-6000 Seconds> auditlog <enabledisable> auditsize <Size in Kbytes>

Range is 1-500 Kbytes.

authlog <offerrorwarninginfodebug> clicommands <enabledisable>

contact <Admin contact info>

devlog <offerrorwarninginfodebug> diaglog <offerrorwarninginfodebug> genlog <offerrorwarninginfodebug> includesyslog <enabledisable> location <Physical Location>

netlog <offerrorwarninginfodebug> nms1 <IP Address or Name>

nms2 <IP Address or Name> phonehome <enabledisable> phoneip <IP Address> portssh <TCP Port>

rocommunity <Read-Only Community Name> rwcommunity <Read-Write Community Name>

SLC™ 8000 Advanced Console Manager User Guide 81