Samsung CLP-365W/XAA manual Silent installation Mode, Command- line Definition Description

Installing driver over the network

6The searched machines will be shown on the screen. Select the one you wish to use and click OK.

7Follow the instructions in the installation window.

Silent installation Mode

Silent installation mode is an installation method that does not require any user intervention. Once you start the installation, the machine driver and software are automatically installed on you computer. You can start the silent installation by typing /s or /S in the command window.

Command-line Parameters

Following table shows commands that can be used in the command window.

Following command-line are effective and operated when command is used with /s or /S. But /h, /H or /? are exceptional commands that can be operated solely.

Command- line	Definition	Description
/s or	Starts silent installation.	Installs machine drivers
/S		without prompting any UIs
		or user intervention.

Command- line	Definition	Description
/p”<port name>” or	Specifies printer port.	Printer port name can be
/P”<port name>”		specified as IP address,
		hostname, USB local port
	Network Port will
		name or IEEE1284 port
	be created by use	name.
	of Standard TCP/	For example
	IP Port monitor.
		• /p”xxx.xxx.xxx.xxx” in
	For local port, this
	port must exist on	where, “xxx.xxx.xxx.xxx”
		means IP address for
	system before
		network printer. /
	being specified
		p”USB001”, /P”LPT1:”, /
	by command.
		p”hostname”
/a”<dest_path>” or	Specifies destination path	Since machine drivers
/A”<dest_path>”	for installation.	should be installed on the OS
		specific location, this
	The destination	command applies to only
		application software.
	path should be a
	fully qualified
	path.
/n”<Printer name>”	Specifies printer name.	With this parameter, you can
or	Printer instance shall be	add printer instances as your
/N”<Printer name>”	created as specified	wishes.
	printer name.

2. Using a network-connected machine 101