Samsung CLP-365W/XAA manual IP setting using SetIP Program Windows

Wireless network setup

• After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 100).

•See your network administrator, or the person that set up your wireless network, for information about your network configuration.

Items to prepare

•Access point

•Network-connected computer

•Software CD that was provided with your machine

•A machine installed with a wireless network interface

•Network cable

IP setting using SetIP Program (Windows)

This program is used to manually set the network IP address of your machine using its MAC address to communicate with the machine. The MAC address is the hardware serial number of the network interface and can be found in the Network Configuration Report.

See "Setting IP address" on page 97.

Configuring the machine’s wireless network

Before starting you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network.

To configure wireless parameters, you can use SyncThru™ Web Service.

Printing a network configuration report

You can identify the network settings of your machine by printing a network configuration report.

See "Printing a network configuration report" on page 97.

Using SyncThru™ Web Service

Before starting wireless parameter configuration, check the cable connection status.

2. Using a network-connected machine 125