Samsung CLP-365W/XAA manual Background scatter, Characters or pictures

Printing quality problems

Condition	Suggested Solutions
Vertical repetitive defects	If marks repeatedly appear on the printed side of the page at even intervals:

• The imaging unit may be damaged. If you still have the same problem, remove the imaging unit and, install a new one (see "Replacing the imaging unit" on page 53).

• Parts of the machine may have toner on them. If the defects occur on the back of the page, the problem will likely correct itself after a few more pages.

• The fusing assembly may be damaged. Contact a service representative.

Background scatter	Background scatter results from bits of toner randomly distributed on the printed page.
A	• The paper may be too damp. Try printing with a different batch of paper. Do not open packages of paper until necessary so that
	the paper does not absorb too much moisture.
	• If background scatter covers the entire surface area of a printed page, adjust the print resolution through your software application
	or in Printing Preferences (see "Opening printing preferences" on page 36). Ensure the correct paper type is selected. For
	example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging can occur causing this copy quality problem.
	• If you are using a new toner cartridge, redistribute the toner first (see "Redistributing toner" on page 47).

Toner particles are around bold The toner might not adhere properly to this type of paper.
characters or pictures	• Change the printer option and try again. Go to Printing Preferences, click the Paper tab, and set the paper type to Recycled (see
	"Opening printing preferences" on page 36).
	• Ensure the correct paper type is selected. For example: If Thicker Paper is selected, but Plain Paper actually used, an overcharging
	can occur causing this copy quality problem.

5. Troubleshooting 177