Wireless network setup

Before entering the IP address for the machine, you must know the computer’s network configuration information. If the computer’s network

configuration is set to DHCP, the wireless network setting should also be DHCP. Likewise, if the computer’s network configuration is set to Static, the wireless network setting should also be Static.

If your computer is set to DHCP and you want to use the Static wireless network setting, you must contact the network administrator to get the static IP address.

For the DHCP method

If the IP address assignment method is DHCP, check if DHCP is shown in the Wireless Network Setting Confirm window. If it shows Static, click Change TCP/IP to change the assignment method to Receive IP address automatically (DHCP).

For the Static method

If the IP address assignment method is Static, check if Static is shown in the Wireless Network Setting Confirm window. If it shows DHCP, click Change TCP/IP to enter the IP address and other network configuration values for the machine.

For example,

If the computer’s network information is as shown follows:

-IP address: 169.254.133.42

-Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as below:

-IP address: 169.254.133.43

-Subnet Mask: 255.255.0.0 (Use the computer’s subnet mask.)

-Gateway: 169.254.133.1

7The Wireless Network Setting Complete window appears. Click Next.

8When the wireless network settings are completed, disconnect the USB cable between the computer and machine. Click Next.

9Select software to be installed.

10

After selecting the components, you can also change the printer driver

 

name, set the machine to be shared on the network, set the machine as

 

the default machine. Click Next.

11

If you want to register your machine with the Samusng web site and

 

receive useful information, click On-line Registration. If not, click

Finish.

Setup using Mac

Items to prepare

Access point

Network-connected computer

Software CD that was provided with your machine

A machine installed with a wireless network interface

USB cable

2. Using a network-connected machine 120

Page 120
Image 120
Samsung CLP-365W/XAA manual Setup using Mac, For the Dhcp method, For the Static method