Lantronix SLC 8000 manual Manage Files

	9: USB/SD Card Port
IP Settings
Service	The available connection services for this modem port (None, Telnet, SSH, or
	TCP). Only one can be active at a time. The default is None.
Telnet Port	Telnet Port Telnet session port number to use if you selected Telnet.
	Defaults:
	 USB Port U1: 2049
	 USB Port U2: 2050
	 Range: 1025-65535
SSH Port	The SSH session port number to use if you selected SSH.
	Defaults:
	 USB Port U1: 3049
	 USB Port U2: 3050
	 Range: 1025-65535
TCP Port	The TCP (raw) session port number to use if you selected TCP.
	Defaults:
	 USB Port U1: 4049
	 USB Port U2: 4050
	 Range: 1025-65535
Authenticate	If selected, the SLC unit requires user authentication before granting access to
(checkbox)	the port. Authenticate is selected by default for Telnet Port and SSH Port, but
	not for TCP Port.

4. Click Apply.

Manage Files

To manage files, perform the following steps.

1.Click the Manage Files on the Storage Device link on the Devices > USB > Configure page.

Figure 9-5 Firmware and Configurations - Manage Files (Top of Page)

Note: At the bottom of the page, shown in Figure 9-5, are the Delete, Download, and Rename options.

SLC™ 8000 Advanced Console Manager User Guide 164