Lantronix SLC 8000 manual Events, Event Trigger, Ethernet

12: Maintenance

Events

On this Maintenance > Events page, you can define what action you want to take for events that may occur in the SLC unit.

1.Click the Maintenance tab and select the Events option. The following page displays:

Figure 12-13 Maintenance > Events

2. Enter the following:

Event Trigger	From the drop-down list, select the type of incident that triggers an event. Currently,
	the options are:
	 Receive Trap
	 Temperature Over/Under Limit (for Sensorsoft devices)
	 Humidity Over/Under Limit (for Sensorsoft devices)
	 Device Port Data Drop
	 No Internal Modem Dial Tone
Action	From the drop-down list, select the action taken because of the trigger. For
	example, the action can be writing an entry into the syslog with details of the event
	or sending the trap(s) to the Ethernet or modem connection.
Ethernet	For actions that require an Ethernet connection (for example, Forward All Traps to
	Ethernet), select the Ethernet port to use.

SLC™ 8000 Advanced Console Manager User Guide 249