Lantronix SLC 8000 manual PPP Mode, Remote/Dial-out Pwd

	9: USB/SD Card Port
PPP Mode
Negotiate IP Address	If the SLC unit and/or the serial device have dynamic IP addresses (e.g., IP
	addresses assigned by a DHCP server), select Yes. Yes is the default.
	If the SLC unit or the modem have fixed IP addresses, select No, and enter the
	Local IP (IP address of the port) and Remote IP (IP address of the modem).
Authentication	Enables PAP or CHAP authentication for modem logins. PAP is the default.
	With PAP, users are authenticated by means of the Local Users and any of the
	remote authentication methods that are enabled. With CHAP, the CHAP
	Handshake fields authenticate the user.
CHAP Handshake	The Host/User Name (for UNIX systems) or Secret/User Password (for
	Windows systems) used for CHAP authentication. May have up to 128 characters.
CHAP Auth Uses	For CHAP authentication, determines what is used to validate the CHAP host/
	user sent by the remote peer: either the CHAP Host defined for the modem, or
	any of the users in the Local Users list.
Same authentication for	Select this option to let incoming connections (dial-in) use the same
Dial-in & Dial-on-Demand	authentication settings as outgoing connections (dial-on-demand). If this option
(DOD)	is not selected, then the dial-on-demand connections take their authentication
	settings from the DOD parameter settings. If DOD Authentication is PAP,
	then the DOD CHAP Handshake field is not used.
DOD Authentication	Enables PAP or CHAP authentication for dial-in & dial-on-demand. PAP is the
	default. With PAP, users are authenticated by means of the Local Users and
	any of the remote authentication methods that are enabled. With CHAP, the
	DOD CHAP Handshake fields authenticate the user.
DOD CHAP Handshake	For DOD Authentication, enter the Host/User Name for UNIX systems) or
	Secret/User Password (for Windows systems) used for CHAP authentication.
	May have up to 128 characters.
Enable NAT	Select to enable Network Address Translation (NAT) for dial-in and dial-out
	PPP connections on a per modem (device port or USB port) basis. Users
	dialing into the SLC access the network connected to Eth1 and/or Eth2.
	Note: IP forwarding must be enabled on the Network > Network Settings page
	for NAT to work. See Chapter 6: Basic Parameters on page 57.
Dial-out Number	Phone number for dialing out to a remote system or serial device. May have up
	to 20 characters. Any format is acceptable.
Remote/Dial-out Login	User ID for authentication when dialing out to a remote system, or if a remote
	system requests authentication from the SLC device when it dials in. May have up
	to 32 characters. This ID is used for authenticating the SLC unit during the dial-out
	portion of a dial-back (including CBCP server) and dial-on-demand.
Remote/Dial-out Pwd	Password for authentication when dialing out to a remote system, or if a
	remote system requests authentication from the SLC unit when it dials in. May
	have up to 64 characters.
Retype	Re-enter password for dialing out to a remote system. May have up to 64
	characters.
Restart Delay	The number of seconds after the timeout and before the SLC 8000 advanced
	console manager attempts another connection. The default is 30 seconds.
CBCP Server	For CBCP Server state, allows "No Callback" as an option in the CBCP
Allow No Callback	handshake in addition to User-defined Number and Admin-defined Number.
CBCP Client Type	For CBCP Client, this selects the number that the client would like to use for
	callback - either a user-defined number passed to the server (specified by the
	Fixed Dial-back Number) or an administrator-defined number determined by
	the server based on the login that is PAP or CHAP authenticated.

SLC™ 8000 Advanced Console Manager User Guide 163