Setting the External Audio Processor

Following Steps 1 to 5 describe the common procedures for operating the Audio Processor setting function. For details of the setting function items, refer to descriptions of respective items.

1 Check the Defeat mode is OFF (page 54), and then touch [ ] on the main screen.

The SETUP selection screen is displayed.

2 Touch [ ] of Audio Setup. The Audio Setup screen appears.

3 Touch [ ] of A.Processor.

The A.Processor list screen appears.

4 Touch [ ], [ ] or the title bar of the desired item to change its setting.

Setting items:

Media Xpander / Bass Sound Cont. / Dolby PLII / Rear Fill / X-Over / Time Correction / Phase / G-EQ / P-EQ / Speaker Select / Multi Ch Setup / Speaker Setup / DVD Level / PCM Mode

5 Touch [ ] to return to the previous screen.

Set MX Mode of the External Audio Processor

Before performing the operations below, set MX (Media Xpander) mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.

Setting item: Media Xpander

1 Select ON or OFF of MX by touching [ ] or [ ] of Media Xpander.

OFF: Turns off the MX effect of every music source.

ON: Turns on the specified MX mode.

2 Touch the title bar of Media Xpander after setting to ON.

The Media Xpander setup screen appears.

3 Touch [ ] or [ ] of the desired MX mode.

Music source (such as CDs, iPod) level can be set.

MX CD (OFF, CD MX 1 to 3)

CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity.

MX CMPM (OFF, CMPM MX 1 to 3) / MX SXM (OFF, SXM MX 1 to 3)

This corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original.

78-EN

MX Tuner (OFF, Tuner MX 1 to 3 )

The medium to high frequencies become more clear, and produces well balanced sound in all the bands.

MX DVD (OFF, Movie MX 1 to 2)

The dialogue portion of the video is reproduced more clearly.

(DVD Music)

This disc contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.

MX AUX (OFF, CMPM MX, Movie MX, Music MX)

Choose the MX mode (CMPM, Music, or Movie) that corresponds to the media connected.

The contents of MX set here is reflected to PXA-H700 or PXA-H701.

When OFF is selected, MX effect of each MX mode will be OFF.

Each music source, such as CD, and MP3 can have its own MX setting.

There is no MX mode for AM radio.

MX CMPM is applied for MP3/WMA/AAC, Pandora Radio and iPod/iPhone.

MX Tuner is applied for HD Radio and RBDS reception.

MX SXM is applied for SiriusXM reception.

The MX setting can be performed only when a source is currently selected.

This function is inoperable when Defeat is set to ON.

Setting Bass Sound Control

Setting item: Bass Sound Cont.

Setting Bass Compressor

You can adjust the sound of low frequencies as desired.

Touch [ ] or [ ] of Bass Comp. to select the desired mode.

Bass sound is emphasized more as the mode is sequentially switched as Mode 1 2 3, offering you vivid low frequencies.

Select OFF when the setting is not necessary.

Setting Bass Focus

Using the previously specified delay number (time difference) allows you to set a time difference between the front-rear/left- right speakers. Namely, it enables a time correction based on your preference. With an initial delay of 0.05 ms for each of the 0 to 400 steps, audible time correction can be achieved.

Set the delay number in the front and rear, and on the right and left of the desired speaker by touching the respective [ ] or [ ] button.

Any setting in Bass Focus is applied in time correction, too (page 79).

Page 78
Image 78
Alpine INA-W910 owner manual Setting the External Audio Processor, Set MX Mode of the External Audio Processor, 78-EN