How to use a Seal
If A is used for installation:
Affix the seal so that mounting holes B and C are covered.
If B is used for installation:
Affix the seal so that mounting holes A and C are covered.
If C is used for installation:
Affix the seal so that the mounting holes A and B are covered.
•If the mounting sleeve is not used while installing the unit, please stick the seal on A position to prevent the dust from entering the unit.
Installing the Face Plate
*2 If B is used, the supplied face plate may be mounted. If A or C is used, the face plate cannot be mounted.
Reinforce the head unit with the metal mounting strap (not supplied). Secure the ground lead of the unit to a clean metal spot using a screw (*1) already attached to the vehicle’s chassis.
•For the screw marked “*2”, use an appropriate screw for the chosen mounting location.
Connect each input lead coming from an amplifier or equalizer to the corresponding output lead coming from the left rear of the
5 Slide the
Removal
1.Insert the bracket keys into the unit, along the guides on either side. The unit can now be removed from the mounting sleeve.
This unit
Bracket keys (Included)
2. Pull the unit out, keeping it unlocked as you do so.
<JAPANESE CAR>
4
Hex Nut (M5)
*2
Metal
Mounting
Strap
*1
Screw
Bolt Stud
Take the face plate off, and secure the ground lead of the unit to a clean metal spot using a screw (*) already attached to the car’s chassis.
Attach the Original Mounting Bracket to each side of the
Screws (M5 × 8) (Included)
Ground Lead
*
Mounting
Bracket
Face Plate (Included)
Ground Lead | This unit |
Chassis
Chassis
