Setting the Response Slope for the High Range Speaker (TW Setup)

Depending on the response characteristics of the speaker, care should be taken when setting the response slope of the high range speaker to FLAT in 2.2ch (3WAY) mode (see “Adjusting the Crossover Settings (X-OVER)” on page 73), as speaker damage may result.

Setting item: TW Setup

Touch [ ] or [ ] of TW Setup to select Factory’s or User’s.

Factory’s: As protection from possible speaker damage, FLAT cannot be set for the response slope of the high range speaker in 2.2ch (3WAY) mode.

User’s: The FLAT setting is possible in 2.2ch (3WAY) mode.

The TW Setup mode can only be selected if the FRONT/REAR/ SUBW. (4.2CH)/3WAY (2.2CH) switch on the IMPRINT audio processor (PXA-H100) is set to 3WAY (2.2CH).

Setting the MX Level (Media Xpander)

MX (Media Xpander) makes vocals or instruments sound distinct regardless of the music source. The FM radio, CD, Flash memory and iPod/iPhone, will be able to reproduce the music clearly even in cars with a lot of road noise.

Setting item: Media Xpander

1 Touch [ ] or [ ] of Media Xpander to select ON or OFF.

OFF: Turns off the MX effect of every music source.

ON: Turns on the specified MX mode.

2 Touch [ ] after setting to ON.

The Media Xpander setup screen appears.

3 Touch [ ] or [ ] of the desired MX mode.

Music source (such as radio broadcasts and CDs, excluding AM radio) level can be set.

72-EN

MX CD (OFF, CD MX 1 to 3)

CD mode processes a large quantity of data. This data is used to reproduce the sound cleanly by making use of the data quantity.

MX CMPM (OFF, CMPM MX 1 to 3) / MX SXM (OFF, SXM MX 1 to 3)

This corrects information that was omitted at the time of compression. This reproduces a well-balanced sound close to the original.

MX Tuner (OFF, Tuner MX 1 to 3 )

The medium to high frequencies become more clear, and produces well balanced sound in all the bands.

MX DVD (OFF, MOVIE MX 1 to 2)

The dialog portion of the video is reproduced more clearly.

(DVD MUSIC)

This disc contains a large quantity of data such as music clip. MX uses this data to reproduce the sound accurately.

MX AUX (OFF, CMPM MX, MOVIE MX, MUSIC MX)

Choose the MX mode (CMPM, MUSIC, or MOVIE) that corresponds to the media connected.

When OFF is selected, MX effect of each MX mode will be OFF.

Each music source, such as radio, CD and MP3 can have its own MX setting.

MX mode does not function when MX is ON for AM radio.

MX CMPM is applied for MP3/WMA/AAC, Pandora Radio and iPod/ iPhone.

MX Tuner is applied for HD Radio and RBDS reception.

MX SXM is applied for SiriusXM reception.

The MX setting can be performed only when a source is currently selected.

Adjusting the Parametric Equalizer Curve (P-EQ)

You can modify the Equalizer settings to create a response curve more appealing to your personal taste.

Setting item: P-EQ

1 Select L+R by touching [ ] of P-EQ.

When graphic EQ is set to L+R, the setting will be turned off.

2 Touch [ ] of P-EQ after selecting L+R.

The P-EQ list screen appears.

3 Adjust the P-EQ to your preference.

Adjusting the Band

Touch [ ] or [ ] of Band to select the band to be adjusted.

Band 1 / Band 2 / Band 3 / Band 4 / Band 5

Page 72
Image 72
Alpine INA-W910 owner manual Setting the MX Level Media Xpander, 72-EN, Adjusting the Parametric Equalizer Curve P-EQ