Video/Audio Input Connectors

YELLOW is for input video, RED is right and WHITE is left input the audio.

Remote Control Output Lead (White/Brown)

Connect this lead to the remote control input lead. This lead outputs the controlling signals from the remote control.

Remote Control Input Lead (White/Brown)

Reverse Lead (Orange/White)

Use only when a back-up camera is connected. Connect to the plus side of the car’s reverse lamp. This lamp illuminates when the transmission is shifted into reverse (R).

With this lead properly wired, the video picture automatically switches to the back-up camera whenever the car is put into reverse (R).

RCA Extension Cable (sold separately)

Direct CAMERA Input Connector

Use when the optional direct camera is connected.

Camera extension cable (Included with direct camera)

About the Rules of Bluetooth Electromagnetic Radiation Regulation

USA/Canada

This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

130-EN

Page 130
Image 130
Alpine INA-W910 owner manual 130-EN, Video/Audio Input Connectors, Camera extension cable Included with direct camera