When Connecting External Equipment

 

 

 

Direct camera HCE-C117D, etc.

 

 

 

(sold separately)

 

 

 

To Video Output terminal

 

 

 

Camera with RCA video output

 

 

 

(sold separately)

 

 

 

To Audio Input terminal

 

 

 

Rear monitor

 

 

 

(sold separately)

 

 

 

To Video Input terminal

 

 

 

To Video Output terminal

 

 

 

TV Tuner

 

 

 

(sold separately)

 

 

 

To Audio Output terminal

 

 

 

To Video Output terminal

 

 

 

DVE-5207, etc.

 

 

 

(sold separately)

 

 

 

To Audio Output terminal

(White/Brown)

REMOTE OUT

REMOTE IN

(White/Brown)

(White/Brown)

REMOTE IN

REMOTE OUT

(White/Brown)

(Orange/White) REVERSE

Use only when back-up camera is connected.

System Switch

When connecting an IMPRINT audio processor or divider using Ai-NET feature, place the switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position.

Be sure to turn the power off to the unit before changing the switch position.

AUX I/O / Camera Input Connector

Camera Input RCA Connector (CAMERA IN)

Use when connecting an optional camera with RCA video output connector.

Video/Audio Output Connectors (AUX OUTPUT)

Use when connecting an optional monitor etc.

Video/Audio Input Connectors (AUX INPUT)

iPod (V)/AUX Input Connector

Input the iPhone/video compatible iPod audio/video signal or AUX video/audio signal.

Set “AUX2 IN” to “AUX” in “Setting the AUX2 Mode” (page 67) when normal AUX video/audio is input.

When you use this connector as normal video/audio input connector

(AUX 2 Input), an optional AV/RCA interface cable should be used. For details, refer to .

AV/RCA interface cable (4-pole mini AV plug to 3-RCA) (sold separately)

Usable 4-pole mini AV plug

Wiring convention of this system is as follows:

Audio L (White)

Audio R (Red)

Ground

Video (Yellow)

Configuration commercially available 4-pole mini AV plugs is not unified.

129-EN

Page 129
Image 129
Alpine INA-W910 129-EN, When Connecting External Equipment, Use only when back-up camera is connected System Switch