Calibration when connected to HCE-C300R
Obstacle detection performance adjustment and guidance mark settings of
For details on calibration, refer to “Calibration” in the owner’s manual of
When connected to this unit, you can perform operations via the screen of this unit.
To activate the Calibration Setup Mode in this unit
1 Perform steps 1 and 2 in “Performing Calibration” of the owner’s manual of
2 Press SOURCE/ 
on the unit.
The SOURCE selection screen is displayed.
3 Touch 
(CAMERA).
The Camera mode is activated and the Top menu is displayed.
4 Touch any area of the screen to display the view change function keys.
•Make sure view change function is set to ON (page 66).
Display example for Top menu screen
Continue with the following operations after performing step 4 in “Performing Calibration” of the owner’s manual of
[Corner] = VIEW: Selects a desired item.
(The switch that is selected is enclosed by a yellow frame.)
[Back] = SET.: Executes the selection.
5 Touch [Back] 
[Corner] 
[Back] according to the instructions on the screen.
The Setup Mode screen appears.
Display example for Setup mode screen
