8-9

This is only a brief description of these buttons. Detailed uses of the buttons are different in particular functions and will be described later in the instructions.

Pressing [MODE] button will toggle among the modes above. Note that there is no auto-return function in the stopwatch. Whenever you change modes, the stopwatch will remain in that mode until the [MODE] button is pressed again.

8

Time of Day Mode

The starting point for operating your stopwatch is TIME OF DAY. If TIME OF DAY is not displayed, press [Mode] until it is.

Year : - 2008

Date : - January 1

Day of week : - Monday

Time : - 12:00 am

The display format is as below :

° year

° day, month - date

° hr : min second

9

10-11

ACCUSPLIT products use a common setting procedure known as S1-S2-S3-S4.

S1 (2 sec) - Enter set function OR

S1 (4 sec) - Enter set function & clear the current settings S2 – Select field to be set (selected field will flash)

S3 – Set field to desired settings

S4 – Exit setting function

S1/S4

S2S3

 

Year

 

Month and date

 

Seconds

Hour

Minutes

 

 

MODE

10

During clock display, press [START • SPLIT] to switch between 12 hr and 24 hr display mode. To toggle chime ON or OFF, you can press [STOP

RESET].The bell icon will be ON or OFF corre- spondingly.

Normal Time Setting

Press and hold [RECALL] (S1) for 2 seconds to enter setting mode.The normal time setting starts with second.The second digits will be flashing. You can change the flashing digit by pressing [START • SPLIT] (S3) button.To speed up the setting you can press and hold [START • SPLIT] for longer than 2 seconds to activate fast set- ting.To select other digits, press [STOP • RESET] (S2) button.The setting order is: Second, Minute, Hour,Year, Month, Date, month-date (m-d) or

11

Page 3
Image 3
Accusplit AX602M500DEC operating instructions 10-11, Time of Day Mode, Normal Time Setting