48-49
Press [START • SPLIT] (S3) to toggle between KM and MILE.To select the following digits, press [STOP • RESET] (S2).The far right digit will blink and you can set the distance from the least significant digit to the most significant digit.The distance can be set in the range 0.000 to 1999.999 km (or ML) using [START • SPLIT] (S3). Press [RECALL] (S4) or [MODE] to exit from the setting mode.
As an example, the distance is set at 400m.
° 0.4 km = 400m
° Stop indicator
48
Speed Mode Running
Press [START • SPLIT] to start the Speed timer. The “STOP” indicator is OFF. The maximum time can be up to 19 hr. 59 min. 59.99 sec.
While the timer is running, press [START • SPLIT] to record the lap time and the corresponding speed (in km/hr or mph) will be displayed on the upper line.The lap counter (shown on the upper left corner) will advance by one.
49
50-51
Speed in km/hr
[START • SPLIT]
Press [START • SPLIT] to record more lap times and show different speeds. Note that as the speed exceeds the value 1999.999 km/hr or 1999.999 mph, “Err” will be shown and no storage will be made for that record.
[START • SPLIT]
To stop the speed measurement, press [STOP • RESET] to stop the timer.
50 | 51 |
