20-21
When there are 5 free memories left, the icon “FULL” will blink to remind you of the nearly full situation. Whenever the storage is full, extra split/lap times will not be stored into memory but will still be shown on the display. Any fastest and slowest laps will not be stored.The memory coun- ter will flash as the extra split/lap times are being displayed.The icon “FULL” will be steadily ON.
The maximum memory counter value is 500.
To stop the chronograph, press [STOP • RESET]. The indicator “STOP” will come on again to show the status. Press [STOP • RESET] as the stopwatch stops to reset the stopwatch while the split/lap times will be kept in memory. When the stopwatch starts running from reset state, all the lap memo- ries will be cleared.
20
DecimalTiming
(AX602M500DEC model only)
1.The DEC Model can operate as a normal 1/100 second chronograph as well as decimal minute, decimal second, and decimal hour chronograph.
As you press [MODE] to enter the chronograph mode, the normal 1/100 second chronograph display will be shown.
21
22-23
Reset the chronograph to 00, then press [STOP
•RESET] to cycle through the time base modes. (1/100s). Note the change by looking at the bottom of the display.
Time base indicator
Change to the 1/1000 of a minute chronograph mode by pressing [STOP • RESET] again. (1/1000M)
Time base indicator
Go to the 1/10,000 hour chronograph by pressing [STOP • RESET] again. (1/10,000H)
Time base indicator
22 | 23 |
