DVD/Video CD
Display example for DVD Video main screen
Displays the disc (DVD VIDEO, DVD AUDIO, VIDEO CD) being played back.
Displays the elapsed playback time.
•Some operations cannot be carried out depending on the disc or playback screen.
•Displays of the function guide [P1/2], etc. may vary depending on the connected device(s).
Changes the Contrast Level adjustment screen directly. For details, refer to “Adjusting Image Brilliance (Live Contrast)” on page 62.
Disc types that can be used for each heading are represented by the following marks.
DVD Commercial Video discs (used for the distribution of movies, etc.) or a
DVD Commercial Audio discs can be used.
Playing a Disc 
WARNING
It is dangerous (and illegal in many states) for the driver to watch the DVD/TV/Video while driving the vehicle. The driver may be distracted from looking ahead and an accident could occur.
Install the
If the
To display the DVD mode screen
To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.
1Push the foot brake to bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3While the parking brake is being engaged the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
Now, the locking system for the DVD mode operation has been released. Engaging the parking brake can reactivate the DVD mode, as long as the car’s ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of “To display the DVD mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To display the DVD mode screen.”
•If you try to activate the auxiliary device while driving, the display will show the
Caution
•Not all functions will operate for every DVD. See the individual DVD’s instructions for details on the features supported.
•Fingerprints on a disc may adversely affect playback. If a problem occurs, remove the disc and check for fingerprints on the playback side. Clean the disc if necessary.
•If you switch the power or Ignition key OFF or change sources during playback, playback will continue where you left off when you resume playback.
•If you try to perform an invalid operation (based on
the type of disc being played), the following mark is displayed on the monitor screen:
.
•Play Position Memory Function
Even if you turn power off or switch the Ignition key to OFF during playback or change the source, playback will continue from the point where playback stopped when the power is turned ON again.
