GUIDEVIEW WINDOW™ Function
This function allows you to get the navigation information from the normal screen of Audio Source promptly.
Turn on the GUIDEVIEW WINDOW™ Mode
Go to any audio source screen, press AUDIO 
hardkey to turn on GUIDEVIEW WINDOW™. Press again to turn it off.
GUIDEVIEW WINDOW™ Display
Start-Up
Non Guidance
When touching the GUIDEVIEW WINDOW, the window will toggle between displaying heading orientation and the speed limit of the current street.
The Current street name that the vehicle is matched on to is displayed.
If no GPS signal, the text “Locating GPS Satellites” will be displayed.
If your vehicle is off segment, nothing is displayed in the current street name location.
Route Guidance
The street name of the next maneuver is displayed in the top portion of the screen.
Second immediate maneuver arrow is displayed only for double maneuvers along the route.
The maneuver arrow is displayed for the upcoming guidance.
A countdown bar is displayed when approaching the maneuver.
The distance to the maneuver is displayed at the bottom of the arrow.
Touching the GUIDEVIEW WINDOW will prompt the system to announce the next maneuver.
Rerouting
It will be displayed when the rerouting is calculated.
Settings
Settings Menu
The lockout function applies to Setup Menu and Edit Address Book. To enable setup menu, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedures below.
1Bring your vehicle to a complete stop at a safe location. Engage the parking brake.
2Keep pushing the foot brake and release the parking brake once then engage it again.
3When the parking brake is engaged for the second time, release the foot brake.
•For automatic transmission vehicles, place the transmission lever in the Park position.
