2 Adjust the level.
To increase the level.
To decrease the level.
Note:
Normally, the + and – buttons works as the volume control. So you do not have to select “VOL” to adjust the volume level.
Storing your own sound adjustments
You can adjust the sound modes (BEAT, POP, SOFT) to your preference and store your own adjustments in memory.
•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.
1 Call up the sound mode you want to adjust.
• See the left column for details.
2 Select “BAS” (bass), “TRE” (treble) or “LOUD” (loudness).
3 Adjust the bass or treble level or turn the loudness function ON/OFF.
• See page 16 for details.
4 Repeat steps 2 and 3 to adjust the other items.
5 Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display.
Your adjustment made for the
selected sound mode is stored in memory.
6 Repeat the same procedure to store other sound modes.
To reset to the factory settings
Repeat the same procedure and reassign the preset values listed in the table on page 16.
ENGLISH
17
