Solid State Logic LINK MADI HD manual Safety and Installation Considerations, General Safety

Models: LINK MADI HD

1 32
Download 32 pages 5.64 Kb
Page 5
Image 5
Safety and Installation Considerations

Safety and Installation Considerations

This section contains definitions, warnings, and practical information to ensure a safe working environment.

Please take time to read this section before installing or using this unit. Please do not dispose of these instructions.

General Safety

Power Safety

Read these instructions.

This apparatus is f itted with a universal power supply, approved and certified for

Keep these instructions.

 

operation in this apparatus. There are no user-replaceable fuses.

Heed all warnings.

• A power cord is supplied with this unit. Alternative power cords may be used if rated

Follow all instructions.

 

2.5A or above and fitted with a 3-pin IEC320 connector and a 3-core cable.

• Do not use this apparatus near water.

• This apparatus must be connected to an earthed mains outlet. The earth core of the

 

power cord must always connect to the mains supply ground – the earth core forms

• Do not expose this apparatus to rain or moisture.

 

the safety earth and should not be removed for any reason.

• Clean only with dry cloth.

• If an extension power cable or adaptor is used, ensure that the total power rating of

• Do not block any ventilation openings. Install in accordance with the manufacturer’s

 

the power cable and/or adaptor is not exceeded.

 

instructions.

• An external disconnect device is required for this apparatus; a detachable power cord

• Do not install near any heat sources such as radiators, heat registers, stoves or other

 

– as used for this apparatus – is a suitable disconnect device.

apparatus (including amplifiers) that produce heat.

• An external over-current protection device is required to protect the power wiring to

There are no user-adjustments, or user-serviceable items, inside this apparatus. Do not

 

this apparatus. In certain countries this function is supplied by use of a fused plug.

 

remove the covers of this apparatus; doing so will invalidate your warranty.

• All power wiring should be installed according to local wiring regulations.

• Adjustments or alterations to this app aratus may affect the performance such that

The mains outlet used for this apparatus should be located near by and be easi ly

safety and/or international compliance standards may no longer be met.

 

accessible.

To reduce the risk of electric shock, do not perform any servicing other than that

• Unplug this apparatus during an electrical storm or when unused for long periods of

 

contained in these Installation Instructions unless you are qualified to do so. Refer all

 

time.

 

servicing to qualified service personnel.

Installation Notes

 

 

• When installing this apparatus, either fix it into a standard 19" rack or place the

 

 

 

apparatus on a secure level surface.

• Ensure that no strain is placed on the cables connecting to this apparatus. Ensure also that such cables are not placed where they can be stepped on, pulled or tripped over.

• Do not operate this apparatus whilst it is covered or boxed in any way.

• Do not operate this unit with the covers removed.

1

Page 5
Image 5
Solid State Logic LINK MADI HD Safety and Installation Considerations, General Safety, Power Safety, Installation Notes