10: Connections

Maintenance > Firmware & Configurations page displays.

Connection Commands

These commands for configuring connections correspond to the web page entries described above.

To connect to a device port to monitor and/or interact with it, or to establish an outbound network connection:

connect direct <endpoint>

Endpoint is one of:

deviceport <Port # or Name>

ssh <IP Address or Name> [port <TCP Port>] [<SSH flags>]

where <SSH flags> is one or more of:

user <Login Name> version <12>

command <Command to Execute>

tcp <IP Address> [port <TCP Port>]

telnet <IP Address or Name> [port <TCP Port>] udp <IP Address> [port <UDP Port>] hostlist <Host List>

To configure initial timeout for outgoing connections:

connect global outgoingtimeout <disable1-9999 seconds>

Note: This is not a TCP timeout.

To monitor a device port:

connect listen deviceport <Device Port # or Name>

To connect a device port to another device port or an outbound network connection (data flows in both directions):

connect bidirection <Port # or Name> <endpoint>

Endpoint is one of:

charcount <# of Chars> charseq <Char Sequence> charxfer <toendpointfromendpoint> deviceport <Device Port # or Name> date <MMDDYYhhmm[ss]>

exclusive <enabledisable>

ssh <IP Address or Name> [port <TCP Port] [<SSH flags>] where <SSH flags> is one or more of:

user <Login Name> version <12>

command <Command to Execute>

tcp <IP Address> [port <TCP Port>]

SLC™ 8000 Advanced Console Manager User Guide

171

Page 171
Image 171
Lantronix SLC 8000 Connection Commands, To configure initial timeout for outgoing connections, To monitor a device port