Configuration

Configuring Service Level Verification Options

SLV options are selected from the System menu (see Table 3-2).

Main Menu → Configuration → System → Service Level Verification

Table 3-2. Service Level Verification Options (1 of 2)

SLV Sample Interval (secs)

Possible Settings: 10 ± 3600

Default Setting: 60

Sets the inband communications interval between FrameSaver SLV devices. Inband communications are used to pass frames that calculate latency, as well as transmission success and other SLV information.

10 ± 3600 ± Sets the SLV Sample Interval (secs) in seconds.

SLV Delivery Ratio

Possible Settings: Enable, Disable

Default Setting: Disable

Determines whether communication of Frame and Data Delivery Ratios (FDR/DDR) between FrameSaver SLV devices is enabled. To use this capability, both ends of all PVCs must be FrameSaver SLV devices. If some of the units are FrameSaver 9124s or 9624s, they must be running software version 1.2 or higher.

Enable ± An extra byte for FDR/DDR statistics collection is included with each frame, which is used at the receiving end to determine the amount of data dropped by the network.

Disable ± Extra byte is not included.

DLCI Down on SLV Timeout

Available Settings: Enable, Disable

Default Setting: Disable

Determines whether missed SLV packets will be monitored along with the LMI status to determine the status of PVC connections to remote FrameSaver units.

NOTE: This option does not apply to multiplexed DLCIs connected to a far-end unit with hardware bypass capability.

Enable ± After the configured threshold for missed SLV packets has been exceeded, causing the DLCI's status to turn Inactive, an alarm and SNMP trap are generated, and a Health and Status message created.

Disable ± Missed SLV communications will not be monitored.

SLV Timeout Error Event Threshold

Available Settings: 1, 2, 3, 4 . . . 20

Default Setting: 3

Specifies the number of consecutive missed SLV communications that must be detected before a DLCI Inactive status is declared.

1± 20 ± Sets the limit for these error events.

3-20

March 2000

9664-A2-GB20-00

Page 47 Page 49
Page 48
Image 48
Paradyne 9664 manual Configuring Service Level Verification Options, Service Level Verification Options 1
Page 47 Page 49

9664 specifications

The Paradyne 9664 is a high-performance broadband multiplexer designed for the reliable transmission of data over various types of communication media. This advanced device enables businesses and service providers to integrate multiple digital signal formats into a single high-capacity transmission line, thereby optimizing bandwidth usage and enhancing overall network efficiency.

One of the standout features of the Paradyne 9664 is its ability to support multiple protocols, including T1, T3, and Ethernet. This versatility allows users to consolidate their networking infrastructure, reducing the need for multiple types of equipment and simplifying network management. The device's capability to handle diverse data formats not only makes it suitable for various applications but also ensures future-proofing as technology continues to evolve.

The Paradyne 9664 utilizes advanced Time Division Multiplexing (TDM) technology, which enables it to allocate bandwidth dynamically based on real-time traffic demands. This intelligent bandwidth allocation helps to reduce latency and ensures that critical applications receive the necessary resources when needed. Additionally, the system features robust error correction algorithms to minimize data loss during transmission, enhancing the reliability of the network.

In terms of characteristics, the Paradyne 9664 is designed with user-friendliness in mind. Its modular architecture allows for easy upgrades and scalability, making it an attractive option for growing businesses. The device also features a comprehensive set of diagnostic tools, enabling network administrators to monitor performance and troubleshoot issues effectively.

Another noteworthy aspect of the Paradyne 9664 is its security features. With built-in encryption capabilities and the option to implement virtual private networks (VPNs), the device provides secure data transmission, protecting sensitive information from unauthorized access.

Overall, the Paradyne 9664 stands out as a robust, flexible, and efficient solution for organizations looking to enhance their communication networks. With its combination of advanced technologies, user-centric design, and strong security measures, it is well-equipped to meet the demands of today’s dynamic networking environment, making it an essential tool for businesses aiming to maintain a competitive edge in an increasingly connected world.
Top Page Image Contents