Paradyne 9664 manual Device Messages 4 What It Indicates What To Do, Software

Operation and Maintenance

Table 5-5. Device Messages (4 of 5)

Message	What It Indicates	What To Do
No Primary	New or Modify was	Configure additional DLCIs for
Destination Link	selected from the PVC	the network link and try again.
DLCIs Available	Connection Table, but even	If a network DLCI has been
	though DLCIs are available
	to form a connection, no	entered as a Source DLCI:
	DLCIs are available on the	1.	Change the Source DLCI to a
	network link, which is a
			user data port DLCI.
	suitable Primary PVC
	Destination.	2.	Enter the network DLCI as the
			PVC's Primary Destination.
No Security Records	Delete was selected from	H	No action needed.
to Delete	the Administer Login	H	Enter a security record.
	screen, and no security
	records had been defined.
Password Matching	Password entered in the	H	Try again.
Error ± Re-enter	Re-enter Password field of	H	Contact your system
Password	the Administer Logins
			administrator to verify your
	screen does not match
			password.
	what was entered in the
	Password field.
Permission Denied	A file transfer was
(Seen at an FTP	attempted, but the:
terminal.)	H User did not have	H	See your system administrator
	Level 1 security.		to get your security level
			changed.
	H Wrong file was specified	H	Try again, entering the correct
	when the put command		file with the put command.
	was entered.
	H User attempted to	H	Enter the put command
	upload a program file		instead of a get command;
	from the unit.		you can only transfer files to
			the unit, not from it.
			See Upgrading System
			Software.
Please Wait	Command takes longer	Wait until message clears.
	than 5 seconds.
Resetting Device,	Yes (or y) was entered in	No action needed.
Please Wait ...	the Reset COM Port usage
	field of the System Paused
	menu.

9664-A2-GB20-00 March 2000 5-9