Lantronix SLC 8000 manual General CLI Commands, To configure the current command line session

5: Web and Command Line Interfaces

Should you make a mistake while typing, backspace by pressing the Backspace key and/or the Delete key, depending on how you accessed the interface. Both keys work if you use VT100 emulation in your terminal access program when connecting to the console port. Use the left and right arrow keys to move within a command.

Use the up and down arrows to scroll through previously entered commands. If desired, select one and edit it. You can scroll through up to 100 previous commands entered in the session.

To clear an IP address, type 0.0.0.0, or to clear a non-IP address value, type CLEAR.

When the number of lines displayed by a command exceeds the size of the window (the default is 25), the command output is halted until the user is ready to continue. To display the next line, press Enter, and to display the page, press the space bar. You can override the number of lines (or disable the feature altogether) with the set cli command.

General CLI Commands

The following commands relate to the CLI itself.

To configure the current command line session:

set cli scscommands <enabledisable>

Allows you to use SCS-compatible commands as shortcuts for executing commands:

Note: Settings are retained between CLI sessions for local users and users listed in the remote users list.

SCS Commands	Commands
info	'show sysstatus'
version	'admin version'
reboot	'admin reboot'
poweroff	'admin shutdown'
listdev	'show deviceport names'
direct	'connect direct	deviceport'
listen	'connect listen	deviceport'
clear	'set locallog clear'
telnet	'connect direct	telnet'
ssh	'connect direct	ssh'

To set the number of lines displayed by a command:

set cli terminallines <disableNumber of lines>

Sets the number of lines in the terminal emulation (screen) for paging through text one screenful at a time, if the SLC 8000 advanced console manager cannot detect the size of the terminal automatically.

To show current CLI settings:

show cli

SLC™ 8000 Advanced Console Manager User Guide 55