Lantronix SLC 8000 manual Set temperature, Show temperature, Show vpn rsakey, Parameter

14: Command Reference

show vpn viewlog [numlines <Number of Lines] [email <Email Address>]

Display RSA public key of the SLC:

show vpn rsakey

set temperature

Syntax

set temperature

Description

Sets the acceptable range for the internal temperature sensor (an SNMP trap is sent if the temperature is outside of this range). Temperatures can be entered in either Celsius or Fahrenheit; to indicate a temperature is Fahrenheit, append the degrees with an ‘F’, i.e., “75F”.

Parameter

set temperature <one or more parameters> Parameters: low <Low Temperature in C. or F.> high <High Temperature in C. or F.>

calibrate <Temperature Calibration in C. or F.cancel>

Note: The calibration offset will be applied one hour after setting the value.

Description

Displays the acceptable range and the current reading from the internal temperature sensor.

show temperature

Syntax

show temperature

Description

Shows the temperature.

SLC™ 8000 Advanced Console Manager User Guide 327