Lantronix SLC 8000 manual Unmount, Format, Filesystem Check

9: USB/SD Card Port

Figure 9-3 Devices > SD Card > Configure

3. Enter the following fields.

Mount	Select the checkbox to mount the first partition of the storage device on
	the SLC unit (if not currently mounted). Once mounted, a USB thumb
	drive or SD card is used for firmware updates, device port logging and
	saving/restoring configurations.
Unmount	To eject the USB thumb drive or SD card from the SLC unit , first
	unmount the thumb drive or SD card . Select the checkbox to unmount it.
	Warning: If you eject a thumb drive or SD card from the SLC unit
	without unmounting it, subsequent mounts of a USB thumb drive or
	SD card in may fail, and you will need to reboot the device to restore
	thumb drive or SD card functionality.
Format	Select to:
	 Unmount the USB/SD card device (if it is mounted)
	 Remove all existing partitions
	 Create one partition
	 Format it with the selected file system (ext2, FAT16 or FAT32)
	 Mount the USB device
Filesystem	Select Ext2, FAT16 or FAT32, the filesystems the SLC supports.
Filesystem Check	Select to run a filesystem integrity check on the thumb drive. This is
	recommended if the filesystem does not mount or if the filesystem has errors.

4.Click Apply.

5.Click the Manage Files on Storage Device link to view and manage files on the selected USB thumb drive or SD Card. Files on the storage device may then be deleted, downloaded or renamed. See Manage Files on page 164 for more information.

SLC™ 8000 Advanced Console Manager User Guide 159