Lantronix SLC 8000 manual Local and Remote User Settings, To enable local and/or remote users

11: User Authentication

Local and Remote User Settings

The system administrator can configure the SLC 8000 advanced console manager to use local accounts and remote accounts to authenticate users.

1.Click the User Authentication tab and select the Local/Remote Users option. The following page displays.

Figure 11-3 User Authentication > Local/Remote Users

The top of the page has entry fields for enabling local and remote users and for setting password requirements. The bottom of the page displays a table listing and describing all local and remote users.

To enable local and/or remote users:

1) Enter the following:

Enable Local Users	Select to enable all local users except sysadmin. The sysadmin is always
	available regardless of how you set the check box. Enabled by default.
Multiple Sysadmin	Select to allow the sysadmin to have multiple simultaneous logins to the web
Web Logins	interface. Disabled by default.
Sysadmin Access	Select to limit sysadmin logins to the Console Port only. Disabled by default.
Limited to Console
Port
Authenticate only	Select the check box to authenticate users listed in the Remote Users list in the
remote users who are	lower part of the page. Disabled by default.
in the remote users list

SLC™ 8000 Advanced Console Manager User Guide 178