Lantronix SLC 8000 manual Kerberos Commands, Set kerberos one or more parameters

	11: User Authentication
Date/Time	Right to set the date and time.
Reboot & Shutdown	Right to shut down and reboot the SLC unit.
Local Users	Right to add or delete local users on the system.
Remote	Right to assign a remote user to a user group and assign a set of rights to the user.
Authentication
SSH Keys	Right to set SSH keys for authenticating users.
User Menus	Right to create a custom user menu for the CLI for LDAP users.
Web Access	Right to access Web-Manager.
Diagnostics &	Right to obtain diagnostic information and reports about the unit.
Reports
Firmware &	Right to upgrade the firmware on the unit and save or restore a configuration (all
Configuration	settings). Selecting this option automatically selects Reboot & Shutdown.
Internal Modem	Right to update internal modem settings.
Device Port	Right to control device ports.
Operations
Device Port	Right to enter device port settings.
Configuration
USB	Right to enter modem settings for USB devices and control USB storage devices.
SD Card	Right to enter settings for SD card.

5. Click the Apply button.

Note: You must reboot the unit before your changes will take effect.

Kerberos Commands

These commands for the command line interface correspond to the web page entries described above.

To configure the SLC unit to use Kerberos to authenticate users who log in via the Web, SSH, Telnet, or the console port:

set kerberos <one or more parameters>

Parameters

breakseq <1-10 Chars> clearports <Port List> dataports <Port List> escapeseq <1-10 Chars>

ipaddr <Key Distribution Center IP Address> kdc <Key Distribution Center> listenports <Port List>

port <Key Distribution Center TCP Port> realm <Kerberos Realm>

state <enabledisable> useldapforlookup <enabledisable>

To set user group and permissions for Kerberos users:

set kerberos group <defaultpoweradmin>

SLC™ 8000 Advanced Console Manager User Guide 204