Motorola simplefi manual Device Discovery, Section, Installation

SECTION 3 INSTALLATION

Device Discovery

This section describes the procedure to connect your simplefi and PC. This procedure is known as device discovery.

NOTE:

simplefi is set to discovery mode at the factory. Your simplefi may not be in discovery mode, for example, if you are already using simplefi and intend to install simplefi and SimpleWare software on another PC.

If simplefi is not in discovery mode (does not display the following text), see Appendix C, Troubleshooting for information on how to reset your simplefi to discovery mode.

Looking for PC… simplefi is in discovery mode.

1After restarting your PC, a dialog box prompts you to enter the last three characters of your simplefi serial number. You can find the simplefi serial number on a sticker located on the bottom of your simplefi. You can also find the simplefi serial number on the inside cover of the User Guide, and on the Getting Started guide.

Before device discovery, exit other Windows applications.

If you do not use device discovery to connect your simplefi and PC after installing SimpleWare, you can perform device discovery later by clicking on the add device button in the SimpleServe Console.

SECTION 3, INSTALLATION 18